ISC dhcpd and IP assignments from a pool to specific hosts only

Assigning an IP address statically to a host with a given MAC address using ISC dhcpd is quite trivial, one host entry, a hardware ethernet entry and a fixed-address entry and you are up and running.
But what if you want to assign IP addresses from a pool to only a few hosts with specific MAC addresses?

Before you ask yourself why someone might want to do that, have a look at my (very real) use-case.
I am currently working on setting up an installation server for my employer, ANEXIA Internetdienstleistungs GmbH. The server itself uses PXE, TFTP and FAI for installing systems. To be able to do PXE booting one has to set up an DHCP server to provide configuration details, like the TFTP Server Address and the boot filename.

Now what one should consider is that this system is designed to provide automatic installations for internet-facing hosts, namely ones in public IP networks. Running a DHCP server in such a network is not a good idea. We neither want to dish out configurations to each and every hosts that asks for them, neither do not want to do a PXE boot each and every time one of our systems is restarted. Now the combination of FAI and pxelinux allows for default configurations which force local booting, but this still causes the (re-)boot time for those systems to increase and potentially also increases the load on the TFTP server. Also, let's not even consider thinking about whether this setup is "clean" or not. I personally believe that dishing out IP addresses in a public IP network is a bad thing(tm) and I guess a lot of people will be nodding when reading these lines.

What I was asking myself is how to get something like that set up in a cleaner way, and guess what, I found a solution.
The basic idea behind this is only providing IP configuration via DHCP to a specific set of hosts (with a specific set of MAC addresses) and not providing any information to all other hosts. The specific set of hosts are those that we want to do an install run on. This is a no-brainer and I guess the right way to do that, but implementing this approach is not as straight-forward as I initially thought.

Actually the implementation of that idea caused me a bit of a headache and cost me a few work-hours to get right, that's why I'd like to share the configuration details with you.

Problems running PHP as a separate FastCGI process

As some of you might have noticed this webserver has not been that responsive in the past few hours and I have been working hard on getting that fixed. I finally identified the problem and was able to fix it.

The root of the problem was my setup running PHP as a separate FastCGI process. Unfortunatly it seems as if PHP can only handle 500 requests per FastCGI process and then seems to lock up.
The old setup of this site didn't cause such problems and it seems the problem lies in not setting the PHP_FCGI_CHILDREN and PHP_FCGI_MAX_REQUESTS environment variables with the new setup.

Presented in H^H^H^H^HIPv6

I just wanted to let you know that this blog (actually all webpages I am hosting) are now accessiable via IPv6. Additionally, my mail-server now also accepts IPv6 SMTP and IMAP connections, allowing communication with the IPv6-world.

The setup uses SiXXs as tunnelbroker, with AMIS being the SiXXs PoP in use.
If you experience any problems with the services I am providing via IPv6, please let me know, either via a comment to this article or an email to ipv6@sp-its.at.